Saturday, December 9, 2017

Ag200 - no lights in the darkest month

I've perhaps rashly entered the AG bike in to the Motorcycling Club's Exeter Trial which always runs on the first Friday after New Year. The bike has received a few minor upgrades the last few days, more are planned but I thought I had better take it out for a short test ride....

The light is low but the AG bike is hi vis!

Not designed to blend in.

Cheap Chinese brush guards fitted to keep the wind off my
hands, protect them and hopefully help me stay a bit warmer
on the trial. They are awful quality and made of 'monkey metal'
aka mazac. One of the brackets broke as I tightened it up. Also
fitted is a route holder and sat nav bracket.

I wanted to see if the charging was working ok. Sadly it isn't

The new 6v Motobatt battery was drained flat at about 30
minutes of lights on riding. This bike has truly the worst
lights of any motorcycle I have owned (including a D1 BSA
Bantam which is like a floodlight in comparison). Some work
needed here.

Thursday, December 7, 2017

Early thirties club meet

A great photo dating from, by the looks of the bikes, the early thirties. The image is a professional one and quite sharp, for a bit of fun enlarge it and see how many of the bikes you can recognise in the line-up. Look closely and there is some quite tasty machinery in there.

It looks like the chaps were about to engage in something competitive from the attire and the number boards on the bikes. I say about to as the white coveralls some of the guys are wearing are still very clean! The bike on the far right seems to have Brooklands style streamlining fitted.


Tuesday, December 5, 2017

Bultaco Sherpa S c1960

Press photos and spec for the Bultaco Sherpa S, as far as I know from 1960. The spec gives the capacity as a 175 but I cannot find any reference elsewhere to this size, everywhere lists the Sherpa S as a 125. Any Bultaco experts out there who can elaborate?





Saturday, December 2, 2017

Twenties zeppelin sidecar

Lovely stylish sidecar matched up to a bike I cannot identify. As ever if anyone out there can put a make to the bike then do get in touch. There are some distinctive features - Druid type forks, rim front brake so likely very early twenties, unusual mudguard profile and handlebar shape.


Friday, December 1, 2017

BSA Bantam clutch compression tool

Compare and contrast, to the left the modern BSA Bantam clutch compressor and to the right the MCE compressor from back in the day. One of these works properly and one barely at all, guess which is which!

I was lucky enough to pick up the MCE one recently for a snip on ebay, they usually go for more than the retail of the new version. There is of course a reason for this, the new one is too flimsy and the arms spread at the least provocation. Added to this the arms are bolted on, it is nigh on impossible to get them tight enough and they are liable to let go just at that crucial moment.

Using the MCE tool is a joy and the new imposter the absolute opposite. I could have offered the now redundant new model up for sale but to save anyone else the experience it went in the scrap metal bin instead. If you have a Bantam do yourself a favour and seek out the MCE version, it is definitely worth the small extra expense. 


Wednesday, November 29, 2017

Early Cyclocross

Snap from a cyclocross event of yore. At a guess it dates from the early sixties.


Monday, November 27, 2017

Matt's express Royal Enfield transporter

This was a couple of months back now, just before heading off to the Moto Piston Rally in Santander. I had expected Matt to arrive in his car towing the Crusader behind but he rocked  up with this creation.

A homage to old school motorcycle shop delivery bikes this rig is pulled along by a Moto Guzzi V11 Sport. The chassis is a Blacknell and the body home made. Matt reported that, as a sporting outfit with a lot of weight in the chair, the ride was quite exciting. I rode it around the block with the Crusader unloaded and it was a hoot. Top marks Matt, this is an outfit you will not see another of!




Saturday, November 25, 2017

Bournemouth Motor Cycle and Light Car Club events 1922

A post from Carrer Aldo on the fb Motorcycles 1867 to 1930 group combining for me both local interest and vintage motorcycles stirred my nerdish instincts so I went on a hunt for more info. I haven't found any good information on the Bournemouth Motor Cycle and Light Car Club (BMCLC from now on for brevity's sake) which seems to be long defunct. I did however come across a few more images and for good measure, just for the sake of it, I have included a couple of cars made in Bournemouth during the same era.

Several of the images are taken at Blissford Hill near Fordingbridge. The hill nowadays doesn't look like it would pose much of a challenge for any vehicle (though the event was a flexibility trial so maybe entrants needed to go up in top gear or some such) and is of course now paved. The location remains bucolic and is a popular spot for cyclists.

DT Phillips on a Harley Davidson storming up Blissford Hill.

'Bournemouth MC & LC Club Flexibility Trial, Blissford
Hill, Fordingbridge, April 29th, 1922.' A slightly more
stately looking ascent.

Bournemouth MC & LC Club Flexibility Trial, Fordingbridge,
April 29th, 1922. 'A minor casualty'.

August 12th 1922. A NUT and a Brough Superior outside
the Bournemouth Borough Council Offices.

August 12th 1922 again. Just by the Bournemouth
Council offices adjacent to the pleasure gardens.

Bournemouth MC & LC Club Flexibility Trial, Blissford
Hill, Fordingbridge, April 29th, 1922.

A suit and tie is the only reasonable attire for a gentleman
participating in motor cycle sport!

Bournemouth MC & LC Club Flexibility Trial, Blissford
Hill, Fordingbridge, April 29th, 1922.

Bournemouth MC & LC Club Flexibility Trial, Blissford
Hill, Fordingbridge, April 29th, 1922.

Spring Meeting, Bournemouth MC & LC Club, March
26th, 1922. 'Doesn't it look pretty, papa!'

Spring Meeting, Bournemouth MC & LC Club, Lyndhurst,
March 26th, 1922.

And for good measure a rather low res picture of
the Palmerston car, made in Bournemouth between
1920 and 1923 and which competed in BMCLCC events.
There is more about the Palmerston in a brief
article from local rag, The Evening Echo.

And another low res image of another Bournemouth
motor car: the Christchurch Campbell made for 1922
only and may very well have competed in BMCLCC
events. This image from online car encyclopaedia,
All Car Index.


Thursday, November 23, 2017

Rigid AJS surrounded by sheds

A pair of slightly poor quality snaps of an early post war AJS, either a 16M (350cc) or an 18M (500cc) model.

I have no idea what or where the location is, it looks too grim even for a post war holiday camp, could it be army barracks or perhaps a wartime internment camp? In the second photo you can see the front number plate which is obviously not British though where it is from I am not sure.



Tuesday, November 21, 2017

More Cleveland Two Strokes

The second tranche of Cleveland two stroke miscellania. As with the previous Cleveland post these are all cribbed from the four corners of the interweb. A number of the scans were posted up on the Motorcycles 1886 to 1930 Facebook page by a kindly soul - sorry I cannot find the post again to credit you. I've got a parts manual and an instruction book too which I will endeavour to scan and post in the not too distant future. In the meantime, enjoy these snippets...